LENS COVER Open/Close Ring
BATTERY RELEASE
Set to "OFF",
Remove,
PUSH Button EJECTSwitch
N35
After Use
Turn off the carncorder.
Open the L(D monitor fully. Slide EJECTto open the
cassette holder, then remove the cassette.
PressPUSH to close and lock the cassette holder.
(lose and loci< the L(D monitor.
Slide BATTERY RELEASEto remove the battery pacl<.
Turn the LENS COVER Open/( lose Ring to close
the lens covet.
CleaningTheCmcarder
To clean the exteriot_ wipe gently with a soft cloth.
Put the cloth in diluted mild soap and wring it well to
wipe off heavy dirt. Then wipe again with a dry cloth.
Open the LCD monitor and wipe gently with a soft
cloth. Be careful not to damage the monitor. (lose
the LCD monitor.
To clean the lens, blow it with a blower brush, then
wipe gently with lens cleaning paper.
To detach the eyepiece, turn it counterclockwise and
pull it rlut.
Remove dust from the viewfinder using a blower
brush.
Re-attach the eyepiece and turn it clockwise.
NOTES:
• Avoid using strong cleaning agents such as benzine or alcohol.
• Cleaning should be done only after tile battery pack has been removed or other power units have been
disconnected.
• Mohi may form if the lens is loft dirt),.
• Wherl using a cleaner or chemically treated cloth refer to the cautions of each product.
• When removin_ the eyepiece, be sure to hoM tile viewfinder securel)<
To Next Page
Loading...
