24EN
Menu Screen AvaiJabJe Using The MENU Button (cont.)
TAPE LENGTH
REC TiME
INT. TiME
TITLE LANG.
DATE/TIME
JUP ID NO.
DEMO MODE
Allows you to set the tape length depending on tlqe tape used (_-T_ pg. 12).
Refer to "Animation" and "Time-Lal}se" (_-7_ pg. 27).
Refer to "Time-Lapse" (_T" pg. 27).
Allows you to select the language (ENGLISH, FREN( H, SPANISH or PORTUGUESE)
of Instant Titles (_:z" pg. 25).
Allows you to set the current date and time (_-z" pg. 11 ).
This number is necessary when connecting the camcorder to a device such as a computer
using the I terminal (JLIP). The numbers range frr)m 01 to 99. Factory setting is 06.
Demr,nstrates certain functions such as Fade_Vipe, etc. When
"DEMC) MODE" is set to "(-)N" and the Menu Screen is closed,
the demonstration starts.
Operating the Power Zoom Lever during the demonstration
stops the del_lonstration tel_/porarily. If the Power Zoo11/ Level is
not moved for more than 1 minute after that, the demr)nstration
will resu me.
NOTE:
When a tape whose Erase Protection tab is it-, the position that
not awdlable.
OFF
Automatic demonstration will not take place.
: Factory-preset
To Next Page
Loading...
