JVC GR-AXM225 - Date;Time Settings

Selectwhr_eel
Display
O
O
O
Menu Screen 1
Menu Screen 2
DATE/TIME Menu
-12-hour indication
with AM or PM
Date/Time Settings
Set tile Power Switch to "PRO.". Tile power lamp
comes on.
Press MENU. The Menu Screen al)pears.
Rotate tile Select Wheel to move tile highlight bar to
"NEXT" in Menu Screen 1 and press it to display
Menu Screen 2. Then, rotate it to move the highlight
bar to "DATF/TIME" and press it. The DATE/TIME
Menu appears.
• T() return to the previous settings, rotate the Select
Wheel to move the highlight bar to "EXIT" and
press it, then go to step 7.
• To set only the time without changing the date, go
to step 5.
To set "YEAR", "MONTH" or "DAY", rotate the Select
Wheel to move the highlight bar to the desired item,
a nd press it. When the setting begins blinking, rotate
the Select Wheel until the correct setting appears and
then press it. The setting stops blinl<ing.
Repeat for other date settings.
Rotate the Select Wheel to move the highlight bar to
"TIME" and then press it. When the hour setting
begins blinl<ing, rotate the Select Wheel until the
correct setting appears and then press it. When the
hour setting stops blinldng and tile minute setting
begins blinl<ing, rotate the Select Wheel until the
correct setting appears and then press it. The minute
setting stops blihiring.
When none of these settings ("YEAR", "MONTH",
"DAY", "TIME") blinl<s, rotate the Select Wheel to
move the highlight bar to "EXIT", and press it. The
Menu Screen reappe_,s with the highlight b_, on
"RETURN".
Press the Select Wheel to close the Menu Screen.
1
NOTE:
T_ display tile date and time in tile camcorder'_ display
and on a o;nnect_d TV, see "Date/Time Insert"
('_/ pg. 2_).