SUPPLY POWER
Hook on.
'Push in.
BATTERYRELEASE
Ush_g the battery Pack
Hook its end to the canlcorder (_) and push tile
battery pacls in until it locks in place ®.
(( harging procedure, _-T_pg. 8)
To remove the battery pack
Slide BATTERYRELEASEand pull out tIle battery
pack.
PLAYBACK
Rewind (_) Button
Stop (m) Button Set to
"PLAY",
_1_ Set tile Power Switch to "PLAY".
InJ Press ,_41.
The tape will auton/atically stop at the
beginning of tile tape.
[] Press I_/1111.
Playbacls starts and the playback picture
appears.
o To stop playback, press m.
(For more details, _T_ pg. 30.)
• The viewfinder switches off automatically to
save power when the LCD monitor is opened
at an angle of over 60 degrees.
o The LCD monitor turns on/off when it is
opened/closed at approx. 60 degrees.
Or Simply play back the tape on a VHS VCR
using the Cassette Adapter (VHS Playpak).
z_ pg. 34
INSERTING A VIDEO
CASSETTE
PUSH Button EJECT Switch
[] Open the L(D monitor fully.
Slide EJECT to open the cassette holder.
[] Insert a video cassette.
[] Press PUSH to close the cassette holder.
(For more details, _z _ pg. 10)
SHOOTING
SCOVER
en/Close Ring
to "AUTO"
or "Pro.".
Recording Start/Stop Button
[] Turn tile LENS COVER Open/Close Ring to
open the lens cover.
1_1Setthe Power Switch to "AUTO" or "PR(-).'.
The power lamp will light and an image
will appear.
[] Pressthe Recording Start/Stop Button.
Recrlrding starts.
• To stop recording ternporarily, momentarily
Dress the Recording Start/Stop Btltton r)nce
again.
(For mr)re details, _-T_pgs. 14, 15)
• The viewfinder swit('hes off automati('ally to
save power when the LCD monitor is opened
at an angle of over 60 degrees.
• The LCD monitor turns on/off when it is
opened/closed at approx. 60 degrees.
To Next Page
Loading...
