JVC GR-D350U User Manual

IIViewfinderAdjustment
1 Set the Power Switch to ' REC" while pressing
down the Lock Button located on the switch.
2 Make sure the LCD monitor is closed and
locked. Pull out the viewfinder fully and adjust it
manually for best viewability.
3 Turn the Diopter Adjustment Control until the
indications in the viewfinder are clearly focused.
Example:
Diopter Adj
CAUTION:
When retracting the viewfinder, take care not to
pinch your fingers.
GETTINGSTARTEDEN 1 5
_ BrightnessAdjustmentOf The
Display
1Set the Power Switch A
to "REC" or "PLAY" while , >
pressing down the Lock _
Button located on the < -_
switch.
2 Open the LCD monitor
fully.( "pg. 18)
• To adjust the brightness of V
the viewfinder, pull out the
viewfinder fully and set MENU
"PRIORITY" to "FINDER"
( pg. 22, 24).
3 Press MENU.The z
Menu Screen appears. If E
you are in Playback mode, ,_
please proceed to Step 5.
4 Press A or V to select "DISPLAY", and press
SET or >. The DISPLAY Menu appears.
5 Press A or V to select "BRIGHT", and press
SET or >. The Menu Screen closes and the
brightness control menu appears.
6 Press A or V until the appropriate brightness
is reached and press SET or >.
7 Press MENU The menu screen closes.
|_ipodMounting
To attach the camcorder
to a tripod, align the
direction stud and screw
to the mounting socket
and stud hole on the
camcorder. Then tighten
the screw clockwise.
eSome tripods are not
equipped with studs.

JVC GR-D350U Specifications

General

Brand	JVC
Model	GR-D350U
Category	Camcorder
Language	English