JVC GR-D350U - Editing and Dubbing; Dubbing to VCR and Display Options

32 ENEDITING
I DubbingToA VCR
To AV connecto
(provided)
TV
1 Following the illustrations, connect the
camcorder and the VCR's input connectors.
2 Start playback on the camcorder. ( "pg. 20)
3 At the point you want to start dubbing, start
recording on the VCR. (Refer to the VCR's
instruction manual.)
4 To stop dubbing, stop recording on the VCR,
then stop playback on the camcorder.
NOTES:
• It is recommended to use the AC Adapter as
the power supply instead of the battery pack.
( pg. 13)
• To choose whether or not the following displays
appear on the connected TV
• Date/time
Set "DATE/TIM E" to "ON" or "OFF".
( pg. 22, 25)
• Time code
Set "TIME CODE" to "OFF" or "ON".
( pg. 22, 25)
• Indications other than date/time and time code
Set "ON SCREEN" to "OFF", "LCD" or "LCD/
TV". ( pg. 22, 25)
OYellow to VIDEO IN
ORed to AUDIO R IN
_lWhite to AUDIO L IN