34 ENEDITING
I ConnectionToA PersonalComputer
It is also possible to transfer still/moving images
to a PC with a DV connector by using the
software equipped with the PC or commercially
available software.
If you are.using a Windows&'_XP you can use
Windows _' Messenger to conduct video
conferences over the Internet using a
camcorder. For details, refer to the help for the
Windows _ Messenger.
NOTES:
• It is recommended to use the AC Adapter as
the power supply instead of the battery pack.
(pg. 13)
• When using a DV cable, be sure to use the
optional JVC VC-VDV206U or VC-VDV204U DV
cable depending on the type of DV connector
(4 or 6 pins) on the PC.
• The date/time information cannot be captured into
the PC.
• Refer to the instruction manuals of the PC and
Software.
• The still images can also be transferred to a PC
with a DV connector-equipped capture board.
• The system may not work properly depending on
the PC or capture board you are using.
To DV IN/OUT
When connecting the camcorder to a PC
using a DV cable make sure to follow the
procedure below. Connecting the cable
incorrectly may cause malfunctions to the
camcorder and/or the PC.
• Connect the DV cable first to the PC, and then
to the camcorder.
• Connect the DV cable (plugs) correctly
according to the shape of the DV connector.
= Core filter
DV cable
(optional)
Core filter
To DV connector
PC with DV connector
To Next Page
Loading...
Need help?
General
