EN39
PLAYBACK
FEATURE:
Still Playback
PURPOSE:
To pause during playback.
OPERATION:
1) Press PLAY/PAUSE (
4
/6) during playback.
2) To resume normal playback, press PLAY/PAUSE
(
4
/6) again.
NOTE:
If still playback continues for more than about 3
minutes, the camcorder’s Stop mode is automatically
engaged. After 5 minutes in the Stop mode, the
camcorder’s power is automatically turned off.
FEATURE:
Shuttle Search
PURPOSE:
To allow high-speed search in either direction.
OPERATION:
1) Press FF (
3
) to forward or press REW (
2
) to
reverse during playback.
2) To resume normal playback, press PLAY/PAUSE
(
4
/6).
NOTES:
●
During playback, press and hold REW (
2
) or
FF (
3
). The search continues as long as you hold
the button. Once you release it, normal playback
resumes.
●
A slight mosaic effect appears on screen during
Shuttle Search. This is not a malfunction.
FEATURE:
Slow-Motion Playback
Available only with the RM-V712U remote control
(optional) (Z pg. 47).
FEATURE:
Playback Zoom
Available only with the RM-V712U remote control
(optional) (Z pg. 48).
FEATURE:
Playback Special Effects
Available only with the RM-V712U remote control
(optional) (Z pg. 49).
REW (
2
) Button
FF (
3
) Button
PLAY/PAUSE (
4
/6) Button
STOP (5) Button
Power Switch
To Next Page
Loading...
