EN67
PAUSE
PLAY
STOP
6e
APPLAUSE
D.SOUND
Audio Dub
Standby mode
Display
Audio Dubbing Using Digital Sound Effects
1
Load the provided memory card ( pg. 16) and
perform step 1 and 2 of page 66.
2
Press MENU. The Menu Screen appears.
3
Press + or – to select “ SYSTEM” and press SET/
SELECT. The SYSTEM Menu appears.
4
Press + or – to select “SOUND IN” and press SET/
SELECT. The Sub Menu appears. Press + or – to
select “D.SOUND” and press SET/SELECT. Press +
or – to select “ RETURN”, and press SET/SELECT
twice. The Menu Screen closes and the sound effect
indication appears.
5
Press INDEX to access the sound effects Index
Screen. Press + or – to select the desired sound
effect and press SET/SELECT.
6
Press PLAY (4) to begin Audio Dubbing. The
selected sound effect is dubbed onto the tape.
•The “ ” moves while it is being dubbed.
•To stop dubbing the sound effect midway, press
D.SOUND.
7
Press STOP (5) to end Audio Dubbing.
NOTES:
●
After dubbing, set “SOUND IN” back to “MIC”.
●
The dubbed sound effect is recorded on SOUND 2
(
pg. 46).
●
If you press PAUSE (
6
) to pause dubbing in step 6 the
selected sound effect indication remains displayed. To
resume dubbing, press PLAY (
4
).
MENU Button
D.SOUND Button
INDEX Button
Sound effect
indication
SET/SELECT
Button
+, – Button
To Next Page
Loading...
Need help?
General
