11
2. CONTROLS, INDICATORS AND CONNECTORS
ACCU-FOCUS:
• When this switch is set to "ACCU FOCUS" in the lower
position, the lens iris will be forced to open for
approximately ten seconds.
• The depth of field can be reduced and the lens focusing
can be adjusted more accurately.
9
[TAKE] button
The Super Scene Finder (S.S.F.) function retains the time
code data for IN point and OUT point or CUE point in the
unit's memory.
☞ See “S.S.F. Function on” page 60.
0
Lens mounting ring/Lens lock lever
Hold the lens and use the lever to turn the ring anticlockwise
to release lens.
To mount lens make sure the lens guide pin fits well, and
then turn the ring clockwise until firm.
☞ See "Attaching the Zoom Lens" on page 31.
!
[FILTER] Color temperature conversion filter
control knob
This knob changes the internal color temperature filter.
☞ See "Camera Settings" on page 42.
• As the automatic shutter is activated here, flicker may
appear on the screen depending on the lighting
conditions (such as a fluorescent lamp, etc.)
• This operation is not possible in the LOLUX mode.
2-1 Front Section (Cont’d)
CAUTION:
To Next Page
Loading...
Need help?
General
