To Next PageTo Next PageWhy is the front section’s audio level control not working on my JVC Camcorder?
If the front section’s audio level control isn’t working, check if the CH-1/CH-2 AUDIO SELECT switch is set to “AUTO”. Also, verify if the FULL AUTO switch is set to “ON”.
Why does the battery alarm appear on my JVC GY-HD110 even with a fully charged battery?
If the battery alarm is displayed even with a fully charged battery pack, the battery pack might be old.
What to do if JVC Camcorder cassette cannot be ejected after turning on?
If the cassette cannot be ejected after the power is turned on, the capacity of the power supply may be insufficient. Check the power voltage.
General| Recording Format | HDV/DV |
|---|---|
| HDV Recording | Yes |
| Filter Diameter | 72 mm |
| Lens Mount | Fixed |
| Recording Media | MiniDV tape |
| Type | Professional Camcorder |
| Sensor Type | 3CCD |
| Video Resolution | 1440 x 1080 |
| Lens | Fujinon HD Lens |
| Maximum Aperture | f/1.6 |
| Shutter Speed | 1/10000 sec |
| Gain | 0dB, 3dB, 6dB, 12dB, 18dB |
| Audio Format | PCM 16-bit/48kHz |
| Microphone Input | XLR (2 channels) |
| Viewfinder | 0.44" Color LCD |
| LCD Monitor | 3.5-inch LCD |
| HD Output | HDMI |
| Battery Type | BN-V428U |
Guidelines for safe and optimal operation of the camcorder, covering voltage, temperature, and environmental factors.
Information on compatible JVC battery packs for the GY-HD110.
Details on recommended Mini DV and DVCAM videocassettes, including handling and storage advice.
Explains condensation phenomenon and precautions to prevent tape damage and unit malfunction.
Describes smear, blooming, moire, aliasing, and white dots on the CCD sensor.
Details on the zoom lens controls, including focus, iris, zoom lever, and connectors.
Identification and description of controls on the front of the camera, like shoe mount and microphone holder.
Identification and description of controls on the rear of the camera, including tally lamps and earphone jack.
Description of the LCD monitor door, its brightness control, and audio/TC display switches.
Identification and description of controls on the right side, including user buttons, shutter dial, and ND filter.
Identification and description of controls on the left side, including DC input, line output, and IEEE1394 connectors.
Identification and description of controls on the top section, including viewfinder, memory card slot, and eject switch.
Explains various status indicators, mode indications, and display elements on the LCD and viewfinder.
Overview of the camera system and its components, showing connections for accessories.
Step-by-step guide for attaching the zoom lens securely to the camera body.
Instructions for attaching the supplied microphone to the microphone holder.
Procedure for attaching the viewfinder to the camera's mounting base.
Guide on how to insert an SD memory card into the camcorder for saving settings.
Instructions for removing an SD memory card from the camcorder.
Information regarding SD memory cards, including formatting and recommended types.
Guidance on attaching the viewfinder cable and core filter to reduce radio wave emission.
How to power the camera using the supplied AC adapter and its connections.
Information on the built-in battery that retains date/time data and how to charge it.
Details on operating the camera using external battery packs, including attachment and detachment.
Procedure for charging the external battery pack using the AC adapter.
Steps to attach the battery pack to the camera securely.
Steps to detach the battery pack from the camera safely.
Explains how remaining battery power is shown on the LCD monitor/viewfinder.
Table showing charging times for single and multiple battery packs.
Approximate continuous operating times with battery packs under various conditions.
Important warnings and advice for handling, storage, and service life of battery packs.
Instructions for turning the camera on and understanding mode indications.
Instructions for turning the camera off safely, including precautions.
Procedures for loading and unloading videocassette tapes, including safety precautions.
How to set and display the camera's date and time, including style and format options.
How to display time codes and user bits on the monitor/viewfinder.
How to record time codes that continue existing tape data and ensure scene accuracy.
How to preset time code values, user's bit data, and reset them to zero.
How to sync time codes with an external master unit via IEEE1394 for multi-camera recording.
Adjusts LCD monitor direction, angle, brightness, contrast, and display mode.
Adjusts viewfinder position, focus, screen brightness, contrast, and display mode.
Procedure for adjusting back focus, crucial for telephoto and wide-angle lens performance.
Procedures for adjusting white balance (AUTO A, AUTO B), error messages, and FAW function.
How to set the video format, frame rate, aspect ratio, and output options.
Setting switches for GAIN, WHT.BAL, ND FILTER, and SHUTTER.
How to select the screen size for recorded images, including aspect ratio settings.
How to select audio input sources and adjust audio levels during recording.
How to monitor audio inputs using the monitoring speaker or earphones.
Basic steps for starting and performing recording, including tally lamps and focus assist.
Settings related to tape protection when in record-standby mode and tape protect mode.
How to check recorded content without stopping recording using the RET button.
Function to record color bars and test tone before normal recording for setup.
Steps to configure settings for the HEADER REC function, such as time code and duration.
How to start and perform the HEADER REC operation by pressing the STOP and REC buttons.
Steps for playing back recorded tapes, including VTR mode and stop mode operations.
How to fast forward and rewind tapes using the FF and REW buttons.
How to search through recorded tapes during playback using FF or REW buttons.
How to select and output audio channels (CH-1/CH2, MIX, CH3/4) during playback.
How to connect video signal cables (IEEE1394, Composite, Component) with proper precautions.
How to dub video and audio to an AV device using output terminals.
How to dub video between HDV and DV formats using IEEE1394 connection.
Using the camera to dub to another video device via IEEE1394.
How to record the camera's output to an IEEE1394 backup unit for data safety.
Overview of the menu screen structure, layers, and navigation.
Description of the main menu options available in Camera and VTR modes.
Steps to navigate and change settings within the menu screens using the SHUTTER dial.
Settings for video format, frame rate, aspect ratio, and output options.
Settings for camera operations like AE LEVEL, ALC MAX, PRESET TEMP, SMOOTH TRANS.
Settings for MASTER BLACK, DETAIL, V/H BALANCE, H/V FREQUENCY, SKIN DETECT, BLACK.
Settings for WHITE CLIP, KNEE, LEVEL, MOTION SMOOTH, DNR.
Settings for CINELIKE, COLOR MATRIX, GAMMA, LEVEL, COLOR GAIN, WHITE PAINT, SKIN COLOR ADJUST.
Adjustments for R, G, B GAIN and ROTATION of the color matrix.
Settings for skin detail detection and color range adjustment.
Assigns functions to USER buttons and sets SHUTTER, FAW, GAIN modes.
Settings for TEST TONE, MIC WIND CUT, AUDIO REF. LEVEL, INPUT levels, AUDIO MODE.
Settings for AUDIO MONITOR, FAS AUDIO, SEARCH AUDIO, PB AUDIO CH.
Settings for ZEBRA, F. NO/IRIS IND, FILTER, SAFETY ZONE, CENTER MARK, FOCUS ASSIST.
Settings for VIDEO FORMAT, TAPE REMAIN, TC/UB, AUDIO, BATTERY INFO display.
Settings for LCD+VF display switching, LCD/VF CONTRAST, BLACK & WHITE display.
Settings for time code, user bits, and date/time synchronization.
Settings for date/time display format, time shift, and clock adjustment.
Settings for OUTPUT CHAR, LONG PAUSE TIME, ALARM VR LEVEL, TALLY lamps.
Settings for 1394 REC TRIGGER, BACK SPACE, DR-HD100, MENU ALL RESET, DRUM/FAN HOUR.
Operations for loading, saving, resetting menu settings, and formatting SD cards.
How to restore all menu settings to their original factory defaults.
Steps to format an SD memory card for use with the camcorder.
Guide on using the skin detail function to enhance skin tones and adjust color detection.
How to output color bars for calibration or testing using menu or user buttons.
Explains warning displays, status messages, and error codes for VTR abnormalities.
Details error codes and their corresponding remedies for VTR abnormalities.
Common symptoms and their solutions for camera operation issues.
Instructions to display drum and fan motor usage hours from the OTHERS menu.
Information on how to properly dispose of the product according to environmental regulations.
Technical specifications for the camera's general, camera, VTR, and connector sections.
List of included accessories with the camera, such as lens, adapter, and cables.
Specifications related to the AC adapter, including power and operating conditions.
Diagrams showing the physical dimensions of the camera and its components.
