To Next Page
M
monica13Aug 19, 2025
What to do if my JVC Camcorder power cannot be switched on?
- CChristopher WardAug 19, 2025
If the power cannot be switched on, connect the AC adapter correctly or charge the battery.
What to do if my JVC Camcorder power cannot be switched on?
If the power cannot be switched on, connect the AC adapter correctly or charge the battery.
Why is the indicating lamp not blinking during charging of my JVC GY-HM100U?
Check the remaining battery power. The indicating lamp stops blinking when the battery is fully charged. When charging the battery in a hot or cold environment, ensure that the temperature is within the allowable operating temperature range. Charging may stop to protect the battery if the temperature is outside the allowable range.
Why does my JVC GY-HM100U shooting stop by itself?
Shooting may stop automatically after 12 hours of continuous recording. Also, shooting may stop halfway depending on the card. Check if the card is a recommended SD card (Class 6 or higher). Try erasing the contents of the SD card (DELETE, FORMAT).
What to do if the recorded subject is too dark on my JVC Camcorder?
If the recorded subject appears too dark, try the following: * Use [Lolux]. * Set exposure to the [+] side. * For videos, set to the manual shooting mode and increase the sensitivity using the GAIN switch. * Set the GAIN switch to [AGC]. * For still pictures, set [GAIN UP] to [AUTO]. * Open up the aperture. * Lower the shutter speed.
How to fix focus that is not adjusted automatically on my JVC GY-HM100U Camcorder?
To fix focus that is not adjusted automatically: * Clean any dirt or water droplets from the lens. * If you are shooting in a dark place or shooting a subject that has no contrast between dark and light, adjust the focus manually.
What to do if the remote control does not work with my JVC GY-HM100U?
If the remote control is not working, try these steps: * Replace the battery. * Set [REMOTE] in the [CAMERA SETTINGS] menu to [ON]. The remote control may not function outdoors or under strong light conditions.
Why is there no display on the TV monitor from my JVC GY-HM100U Camcorder?
If there is no display on the TV monitor, set [DISPLAY ON TV] in the [CONNECTION SETTINGS] menu to [ON].
What to do if the color of the recorded subject looks unnatural on my JVC Camcorder?
If the color of the recorded subject looks unnatural (Reddish, bluish, etc.), depending on the lighting conditions or when there are numerous light sources in the background, set to the manual shooting mode and perform auto white balance adjustment. You can also adjust the red or blue using white paint adjustment.
What to do if I am unable to switch to the playback mode when continuous clip recording is paused on my JVC GY-HM100U Camcorder?
When the RREC icon lights up in red or the RW icon lights up in yellow, it is not possible to switch to the playback mode. To switch to the playback mode, close the clip file.
Why is my JVC GY-HM100U screen dark or whitish?
If the screen appears dark or whitish, adjust the angle and brightness of the screen. When used in cold places, the screen may appear darker. The screen may also be reaching the end of its service life, so consult authorized dealers or a JVC service center.
General| Type | Professional Camcorder |
|---|---|
| Optical Zoom | 10x |
| Focus | Auto / Manual |
| Image Stabilization | Optical |
| Sensor Size | 1/3 inch |
| Effective Pixels | 1920 x 1080 |
| Lens | Fujinon |
| Aperture | f/1.6 to f/2.8 |
| White Balance | Auto, Manual, Presets |
| Video Resolution | 1920 x 1080 |
| Frame Rates | 60i, 30p |
| Audio Format | PCM, Dolby Digital |
| Recording Media | SD/SDHC card |
| Audio Input | XLR |
| Video Output | HDMI, Composite |
| Viewfinder | 0.45-inch color LCD |
| Input/Output | USB 2.0, HDMI, Composite, XLR |
