What to do if my JVC GY-HM180U Camcorder SD card cannot be initialized?
If your JVC Camcorder can't initialize (format) the SD card, check if the write-protect switch on the SD card is turned on. Ensure that the write-protect switch is turned off.
How to fix a JVC GY-HM180U when the power does not turn on?
If your JVC Camcorder's power does not turn on, consider these potential solutions: * Ensure the AC adapter is properly connected. * Verify the battery is charged. * If the power was recently turned off, wait at least 5 seconds before attempting to turn it on again.
Why can't I connect my JVC Camcorder to wireless LAN?
If you cannot connect your JVC Camcorder to a wireless LAN, consider the following: * Check the connection mode and settings, specifically the [SSID] and [Passphrase] if not using WPS. * If the Passphrase is incorrect, re-enter it, even if a “Completed the Setup Wizard” message appears.
What to do if the camera image is not output on the LCD monitor and viewfinder screen of my JVC GY-HM180U Camcorder?
If the camera image is not displaying on the LCD monitor and viewfinder screen of your JVC Camcorder, make sure the camera recorder is set to the Camera mode by using the [MODE] selection button.
Why does the battery alarm appear on my JVC GY-HM180U with a charged battery?
If a battery alarm appears on your JVC Camcorder even after inserting a charged battery, it could be that the battery is too old.
What to do if the View Remote screen on my JVC GY-HM180U is not working properly?
If the View Remote screen on your JVC Camcorder turns black, flickers, freezes, or prevents remote operation, the network path may be congested. Wait a while before refreshing (reloading) the web browser.
How to display time code and user's bit on my JVC GY-HM180U?
If the time code and user’s bit are not displayed on your JVC Camcorder, note that they may not appear depending on the display type, even in Camera or Media mode. Also, check if [LCD/VF] B [Display Settings] B [TC/UB] is set to “Off”. To display the time code or user’s bit, set it to “TC” or “UB.”
Why won't playback start on my JVC GY-HM180U after selecting a clip?
If playback doesn't start on your JVC Camcorder after selecting a clip thumbnail, confirm that the selected clip is playable. Playback won't work if the clip has a different video format setting.
Why does the wireless LAN disconnect on my JVC Camcorder?
If your JVC Camcorder's wireless LAN keeps disconnecting, consider these points: * The disconnection could be due to the environment; try changing your usage environment. * As an alternative, connect via a wired LAN.
What to do if my JVC Camcorder is unable to start recording?
If you're having trouble starting a recording on your JVC Camcorder, here's what to check: * Make sure the record trigger button/lock switch on the handle is turned on. * Ensure the write-protect switch on the SD card is off. * Verify the camera recorder is set to Camera mode using the [MODE] selection button. * Confirm the inserted SD card is compatible with the recording format.
General| Effective Pixels | 12.4 MP |
|---|---|
| Optical Zoom | 23x |
| Video Resolution | 1920 x 1080 (HD), 720 x 480 (SD) |
| Focal Length | 4.1mm - 53.3mm |
| Maximum Aperture | f/1.8 - f/2.8 |
| Display Type | LCD |
| Screen Size | 3.5 inches |
| Lens Mount | Fixed |
| LCD Screen Size | 3.5 inches |
| Microphone | Built-in stereo microphone |
| HDMI Output | Yes |
| Battery Type | Lithium-ion |
| Recording Format | MP4 |
| Frame Rate | 30p, 24p |
| Storage | SDHC/SDXC |
| ND Filter | Yes (1/4, 1/16, 1/64) |
| Recording Media | SD/SDHC/SDXC card |
| Video Format | MPEG-2 (HD), MPEG-4 AVC/H.264 (SD) |
| Audio Input | 3.5mm stereo mini jack |
| Interfaces | HDMI, USB 2.0 |
| Audio Format | Dolby Digital 2ch |
| USB Interface | USB 2.0 |
| Audio Recording | 2-channel PCM |
| Resolution | 920, 000 dots |
| LCD Resolution | 920, 000 dots |
To Next Page
