6
3. Recording video
1. Select the SD card to which you want to record:
1.1. Locate the Slot Sel button in the controls area (left side of camera body
with display panel open/unfolded).
1.2. Press the Slot Sel button to toggle between inserted SD cards. The
corresponding light (below the card) will indicate which one is selected
(A or B).
2. Start recording by pressing the Rec button on either the right/back side of
the camera or on top of its handle (Fig. 3a). The display shows a red “Rec”
(Recording) indicator in the top-centre position.
3. Stop recording by pressing the Rec button. The display flashes a red
“Stby” (Standby) indicator for 2 seconds in the top-centre position. Then
“Stby” becomes a non-flashing white indicator.
Fig. 3a. Rec button on camera’s back/right side and on handle
To Next Page
Loading...
