JVC GY-HM620E - Detail;Adjust Item

Shooting Mode
For switching the settings for image recording on
the camera.
0
Standard:
Normal shooting mode.
This setting is suitable for shooting low-noise
image quality.
Use this mode in well lit places.
0
Extended:
High sensitivity shooting mode.
This setting enables recording in various
brightness conditions.
Use this mode in places where the lighting is
difficult to control and the brightness is
insufficient.
[Setting Values: RStandard, Extended]
Reset Process
Restores all items in the [Camera Process
] menu
to their default settings.
Detail/Adjust Item
V/H Balance
For setting the H/V balance to enhance contour
(detail) in
the horizontal (H) or vertical (V) direction.
0
H+1 to H+4:
Increasing the value enhances contour in the
horizontal direction.
0
V+1 to V+4:
Increasing the value enhances contour in the
vertical direction.
[Setting Values: H+1 to H+4, RNormal, V+1
to V+4]
Memo :
0
When [System] under [Record Format] is set to
“SD
”, this item is fixed at “Normal”.
0
When [System
]
under [Record Format] is set to
“HD+SD”, this item can be set during HD
recording, but will be fixed at “Normal” during SD
recording. a
H Frequency
For specifying the correction frequency of the
horizontal contour.
Set this according to the object.
0
High:
Emphasizes the
high frequency range. Use this
when shooting objects with fine patterns.
0
Middle:
Emphasizes the intermediate frequency range.
0
Low:
Emphasizes the low frequency range. Use this
when shooting objects with large patterns.
[Setting Values: High, RMiddle, Low]
Memo :
0
When [System] under [Record Format]
is set to
“SD”, this item is fixed at “Low”.
0
When [System] under [Record Format
] is set to
“HD+SD
”, this item can be set during HD
recording, but will be fixed at “Low” during SD
recording. a
V Frequency
For specifying the correction frequency of the
vertical contour. Set this according to the object.
0
Low:
Emphasizes the low frequency range.
0
Middle:
Emphasizes the intermediate frequency range.
0
High:
Emphasizes the high frequency range.
[Setting Values: Low, RMiddle, High]
Memo :
0
When [System]
under [Record Format] is set to
“SD”, this item is fixed at “Low”.
(A
P117 [ Record Format ] )
0
When [System]
under [Record Format] is set to
“HD+SD”, this item can be set during HD
recording, but will be fixed at “Low” during SD
recording. a
0
“
High” cannot be selected under the following
settings.
0
When [
WResolution] is set to “1920x1080
”,
and [WFrame & Bit Rate] is set to “60i” or
“50i”
0
When [WResolution] is set to “1440x1080
”,
and [WFrame & Bit Rate] is set to “60i” or
“50i”
105
Menu Display and Detailed Settings