JVC GY-HM620E User Manual

o
Switching from a web browser
A
You will see a message indicating
“It is
necessary to change the camera mode to
"Remote
Edit Mode". Change the mode.” on
the web browser.
.
A
B
ChangeCancel
It is necessary to change the camera
mode to "Remote Edit Mode".
Change the mode.
B
Tap (click)
[Change] to switch the camera to
the Remote Edit mode.
.
Exit
Remote Edit Mode
o
Switching from the camera
A
“Change to Remote Edit Mode?
” is
displayed on the display screen of the
camera unit.
B
Select [Change
] and press the Set button
(R) to switch to the Remote Edit mode.
.
B
A
Exit
Remote Edit Mode
Cancel
Change
Remote Edit Mode?
Change to
Memo :
0
When the menu or status is displayed,
display of the confirmation screen will be
put on hold.
0
If the menu is displayed on the camera
recorder, close the menu.
0
If the status is displayed on the camera
recorder, close the status display.
0
Pressing
the
Set button (R) on the camera
recorder while in the Remote Edit Mode
ends the Remote Edit Mode forcibly and
switches to the Camera mode.
0
When FTP upload via the camera unit is
currently in progress, switching to the
Remote Edit mode is disabled.
4
Select the Upload mode.
Select the [Upload] tab.
5
Select the clip you want to upload.
0
A list of the recorded clips appears on the
[Clip List] screen.
0
Tap (click) the clip you want to upload to
select it.
0
Clips being selected are indicated by a
check mark.
Memo :
0
You can
switch the displayed slot using the [Slot
A] and [Slot B] tabs.
0
You
can
use the [J-30] or [K+30] tab to jump to
the previous or next 30 clips on the list.
6
Select the upload operation.
Tap (click) the [Actions] button.
.
4
6
5
163
Connecting to the Network
a

JVC GY-HM620E Specifications

General

Brand	JVC
Model	GY-HM620E
Category	Camcorder
Language	English