JVC GY-HM620E User Manual

1
Select [TC/UB] B [TC Preset]
and press the
Set button (R).
(A P107 [ TC Preset ] )
The
[TC Preset] screen appears.
.
1
Memo :
0
When [TC/UB] B [TC Generator] is set to
“Regen”, the
parameter is displayed as “Regen”
and cannot be selected.
(A P
107 [ TC Generator ] )
2
Set the time code (hour, minute, second,
frame).
Use the cross-shaped button (HI) to place the
cursor at the item to set, then use the cross-
shaped button (JK) to change the values.
.
During drop frame
During non-drop
frame
Cursor
Memo :
0
Press the [OIS/2] button to reset each digit to “0”.
The cursor moves to the time digit (left).
3
Check the values and press the Set button
(R).
0
The time code is set and the screen returns
to [TC/UB].
0
To cancel the setting, press the [CANCEL]
button.
4
Press the [MENU/THUMB] button.
Returns to the normal screen.
Setting Time Code without Opening the
Menu
.
AE LEVEL
MENU/THUMB
CANCEL
MENU/THUMB
CANCEL
FOCUS ASSIST/1 OIS / 2
TIME CODE
Memo :
0
Settings cannot
be made in the following cases.
0
[TC/UB] B [TC Generator] has been set to
“Regen”.
0
Menu screen is displayed.
0
The camera recorder is not in the Camera
mode.
Setting Time Code
1
Set [TC/UB] B [
TC Generator
] to a value
other than “Regen”.
(A P
107 [ TC Generator ] )
2
Hold down the
[MENU/THUMB] button and
press the [
FOCUS ASSIST/1] button.
The [TC Preset] setting screen appears.
.
During drop frame
During non-drop frame
Cursor
3
Set the time code (hour, minute, second,
frame).
Use the cross-shaped button (HI) to place the
cursor at the item to set, then use the cross-
shaped button (JK) to change the values.
Memo :
0
Press the [OIS/2] button to reset each digit to “0”.
The cursor moves to the time digit (left).
68
Shooting

JVC GY-HM620E Specifications

General

Brand	JVC
Model	GY-HM620E
Category	Camcorder
Language	English