JVC GZ-MG155U - Necessary Settings before Use; Charging the Battery Pack; Connecting AC Adapter

Necessary Settings before Use
MENU
Access/Charge Lamp
Set Lever Power/Mode Switch
Be sure to configure the following three
settings before use.
] Set the power/mode switch to OFF.
Slide while pressing down the lock button.
2 Attach the battery pack.
Slide the battery pack down until it locks
in place.
Bottom of the Camera
Nr
ATT.
3 Connect the AC adapter.
DC Connector
AC Adapter
To AC Outlet
Open the cover. (1 t0V to 240V)
• _You can also connect the AC
adapter using the Everio dock connector.
(_:ypg. 6)
• The accesdcharge lamp blinks to indicate
charging has started.
®When the lamp goes out, charging is
finished. Unplug the AC adapter from the
AC outlet and disconnect the AC adapter
from the camera.
Required charging / recording time (approx.)
The values within ( ) are the times when the LED light is on.
Recording time
Battery pack Charging time
GZ-MG255 GZ-MG155
BN-VF808U 1 hr. 30 min.
lhr. 30min. 1 hr. 15min.
(Provided) (1 hr. 25 min.)
3 hr. 5 min.
BN-VF815U 2 hr. 40 min. 2 hr. 35 min.
(2 hr. 55 min.)
4 hr. 35 min.
BN-VF823U 3 hr. 50 min. 3 hr. 50 min.
(4 hr. 20 min.)
GZ-MG 130
1 hr.45 min.
(1 hr.35 min.)
3 hr. 30 min.
(3 hr. 15 min.)
5 hr. 15 min.
(4 hr.55 min.)
12