Preparation:Setthepower/modeswitchtoON.
Slidethepower/mode switch to
MODE to select O (still image)
mode,
The switch returns
to the original
position when it is
• OFF released.
The I_1 lamp on the camera lights up.
Press the PLAY/REC button to
select recording mode.
PLAY/REC
Press and hold the SNAPSHOT
button halfway.
The • indicator becomes green when
the captured image is focused.
[] To change the picture quality
Change the settings in [QUALITY].
(_, pg, 47)
[] To record still images continuously
Set [CONTINUOUS SHOOTING] to
[ON]. (_ pg. 48)
[] IGZ-MG255/155]Tochange the image size
Change the settings in [IMAGE SIZE],
(_ pg. 47)
Press the SNAPSHOT button to
start recording.
m
If the camera is not operated for 5 minutes while the power is on, it turns itself off automatically to
conserve power. To turn the camera on again when using the battery pack, set the power/mode switch
to OFF, then to ON. When using the AC adapter, perform any operation such as zooming.
17