Manual Recording (Continued)
You can use manual recording functions
easily by selecting items in the function
menus.
After performing "To Change to Manual
Recording Mode" (_ pg. 20)
1
FUNCTION
_BJUSTB_IGHTNESS
SHU_ERSPE_D
L Select the desired menu.
For details on each menu, see below.
Select
Set
Select the desired setting.
Select
Set
Depending on the kind of settings you
select, you can set the value by moving the
set lever to ^ /v after selecting.
FUNCT,ON
i_i2i_ilililililililililiiii_i_i_iiiiiiiii!iiiiiiiiiiiiiiiiiiiiiiiiiiil¸ijliiiijiiiiiiiiiiiiiiiiii!!iiiii
The menu disappears and the indicator for
the set function appears.
[] To return to the previous screen
Move the set lever to <.
[] To exit the screen
Press FUNCTION.
[AUTO]: The focus is adjusted automatically.
4 _ _ : Adjusts the focus manually. Move the set lever to < / >
to set the focus. (When zooming, the subject will not go out of
focus if you adjust the focus at the telephoto (T) side before
zooming to the wide-angle (W) side.)
For _ mode
[AUTO]: The brightness is adjusted automatically.
-6 to +6: Corrects the brightness within this range in increments
of 1. Move the set lever to ^ / v to set the value.
For I_1 mode
[--.O]:The brightness is not adjusted.
-2.0 to +2.0 (EV): Corrects the brightness within this range in
increments of 1/3EM. Move the set lever to ^/v to set the
value.
[] To lock the exposure
When the menu disappears after you finish configuring the
setting, press and hold the set lever for more than 2 seconds.
The I_ indicator appears.
22
To Next Page
Loading...
