Managing Files
Set Lever Zoom Lever
PLAY/REC
Button
Power/
Mode
Switch
FUNCTION INFO
J
Do not remove the recording medium or
perform any other operation (such as turning
off the power) while accessing files. Also,
be sure to use the provided AC adapter, as
the data on the recording medium may be
corrupted if the battery becomes exhausted
during operation. If the data on the recording
medium becomes corrupted, format the
recording medium. (_-. pg. 50)
• Protected files cannot be deleted. To delete
them, release the protection first.
® Once files are deleted, they cannot be
restored. Check files before deleting.
• For an SD card, you can use the write/erase
protection tab to set protection. To protect
all the files, slide the tab to the "LOCK"
position.
Write/erase protection tab
Preparation:
® Slide the power/mode switch to MODE to
select _ or _ mode.
• Press the PLAY/REC button to select
playback mode.
ex.) Performing [DELETE].
!
FUNCTION
2 Select [DELETE] or [PROTECT].
Select
Set
Deleting/Protecting the Currently
Displayed File
After performing steps 1-2
,3 Select [CURRENT].
Select
Set
You can select the previous or next file by
moving the set lever to </>.
4 Select [EXECUTE].
Select
Set
[] To exit the screen
Press FUNCTION.
3O
To Next Page
Loading...
