Ifyouselectaneventtoregisterthefileto
beforestartingrecording,thefilewillbe
registeredtotheselectedevent,thusmaking
thefileeasytofindatplayback.Thereareup
to3differentdestinationswithineachevent
(forexample:BABY1,BABY2,BABY3).
Preparation:
® Slide the power/mode switch to MODE to
select _ mode.
• Press the PLAY/REC button to select
recording mode.
!
DIRECT
BACKUP
2 Select [ON/SELECT].
Select
Set
3 Select the event that you want to
register the file to.
® To select a different destination, select
[NEXT PAGE].
• To cancel the event registration, select
[NON SECTION].
Select
m
Once you select to register a file to a certain
event, the setting will remain even if you turn
the power off. Unless you change the setting,
you will register a file to the same event that
you had previously selected.
Preparation:
• Slide the power/mode switch to MODE to
select _ mode.
® Press the PLAY/REC button to select
recording mode.
©/_:_
INDEX
The maximum recording time is displayed for
each picture quality mode ( [u_: ULTRA FINE,
_,' :FINE, _ : NORMAL, _ : ECONOMY).
[] To return to the normal screen
Press the _' button again.
Set
The selected event is displayed on the
screen. Press the REC button to start
recording.
[] To exit the screen
Press EVENT.
[] To search by event for a file to play back
See page 26.
19
To Next Page
Loading...
