® Do not select the sepia (SEPIA) or monotone 23
(MONOTONE) mode before setting white balance.
®The continuous shooting speed will drop when
repeatedly making continuous shots, when using certain
recording media, or under certain recording conditions.
® Select the recording medium properly. 47, 48
®To watch images on a TV, set the TV's input mode or 29
channel that is appropriate for video playback.
• The surface of the disk or card is damaged. It is
recommended to run check disk regularly on the PC,
providing that there is no data on the hard disk of the
camera.
® Do not select the sepia (SEPIA) or monotone 28
(MONOTONE) mode before setting white balance.
®The sound of the hard disk drive may have been
recorded if the camera was moved suddenly during
recording. Do not move or shake the camera suddenly
during recording.
®The temperature of the camera is increasing. If the
camera continues to heat up, playback may be stopped
to protect the recording medium. In this case, turn off the
power, and then wait until the camera cools down.
® Remove protection from the files and delete them. 31
• This is not a malfunction. This can be avoided by 47
recording with DIS activated.
®There is a large number of still images (approx. 1,000 30
or more) stored in the recording medium. Copy the
stored files to a PC, and delete them from the recording
medium.
® Push the SD card in a few more times. 15
®Another operation is being attempted while a DVD burner
that is switched on is connected. Switch off the DVD
burner power, and switch the camera's power off and
back on again.
53
To Next Page
Loading...
