To Next PageTo Next PageHow to fix strange color on my JVC GZ-MS120?
If the color looks strange (too bluish, too reddish, etc.) on your JVC Camcorder, set [WB] in [MANUAL SETTING] appropriately to the light source. Alternatively, select [MWB] in [WB] while holding a sheet of plain white paper in front of the camcorder so that the white paper fills the screen and keep touching OK until the B indicator appears.
What to do if my JVC GZ-MS120 displays 'FORMAT ERROR!'?
If your JVC Camcorder displays 'FORMAT ERROR!', check the operating procedure and try again. If the issue persists, turn the camcorder off and then on again.
How to fix focus that is not adjusted automatically on JVC Camcorder?
If the focus on your JVC Camcorder is not adjusting automatically, first wipe the lens with a lens cleaning cloth. If you are recording in a dark place or a subject with no contrast, adjust the focus manually.
How to fix the JVC Digital Camera when focus is not adjusted automatically?
If the focus on your JVC Digital Camera is not adjusting automatically: * Wipe the lens with a lens cleaning cloth. * If recording in a dark place or a subject with no contrast between dark and light, adjust the focus manually.
What does 'USE AC ADAPTER' mean on JVC Digital Camera?
The message 'USE AC ADAPTER' on your JVC Digital Camera indicates that you should use the AC Adapter as the power supply.
Why is the remaining battery display not correct on my JVC Digital Camera?
If the remaining battery display on your JVC Digital Camera is not correct, especially after prolonged use in high or low temperatures, or repeated charging, fully charge the battery pack, run it down completely, and then recharge it again.
Why is the recorded subject too dark on my JVC GZ-MS120?
If the recorded subject appears too dark on your JVC Camcorder, try the following: * Use backlight compensation. * Set [GAIN UP] to [AGC] or [AUTO]. * Use [NIGHT] from scene select. * Set the brightness to the [+] side.
What to do if my JVC GZ-MS120 says 'NOT FORMATTED'?
If your JVC Camcorder displays 'NOT FORMATTED', select [OK] and then select [YES] to perform the formatting.
What to do if my JVC GZ-MS120 displays 'MEMORY CARD ERROR!'?
If your JVC Camcorder displays a 'MEMORY CARD ERROR!', try the following: * Turn the camcorder off and then on again. * Remove and re-insert the SD card (note that MultiMediaCards cannot be used). * Remove any dirt from the SD card terminals. * Ensure the SD card is inserted before switching the power on. If the problem persists, back up all data and then format the card (note that all data will be deleted).
Why does my JVC Camcorder stop recording by itself?
Your JVC Camcorder might stop recording on its own if the SD card settings are incorrect. To resolve this, insert a commercially available SD card and set both the [VIDEO SLOT SELECTION] and [IMAGE SLOT SELECTION] to [SLOT A] or [SLOT B]. Also, recording stops automatically after 12 hours of non-stop recording, so to ensure continuous recording, set [AUTO SWITCH REC MEDIA] to [ON] before you start recording.
General| Filter size | 30.5 mm |
|---|---|
| Digital zoom | 800 x |
| Optical zoom | 35 x |
| Image stabilizer | Yes |
| Focal length range | 2.2 - 77 mm |
| Focal length (35mm film equivalent) | 36 - 1260 mm |
| Sensor type | CCD |
| Total megapixels | 0.8 MP |
| Optical sensor size | 1/6 \ |
| Display diagonal | 2.7 \ |
| Video out | AV |
| USB 2.0 ports quantity | 1 |
| Product color | Silver |
| Battery type | BN-VF808 |
Weight and Dimensions| Depth | 112.5 mm |
|---|---|
| Width | 54.5 mm |
| Height | 65 mm |
| Weight | 290 g |
Warnings about opening the unit, avoiding electric shock, and servicing by qualified personnel.
Precautions against rain, moisture, heat, liquids, and improper placement.
Cautions on physical damage, tripod use, cable management, and lens handling.
Essential instructions for safe operation, including reading, heeding warnings, and following instructions.
Information on private consumer use, prohibition of commercial use, and listed trademarks.
Steps for charging the battery pack and inserting the SD card for initial setup.
Instructions on how to adjust the grip strap for secure handling of the camcorder.
Step-by-step guide to set the camcorder's date, time, and daylight saving preferences.
Steps to select video mode, start/stop recording, and notes on quality and file management.
Instructions for selecting playback mode, choosing files, and performing basic playback operations.
Explains how to interact with the camcorder's touch sensor for menu navigation and selection.
Advice on backing up data, trial recording, resetting the camcorder, and battery handling.
Guidelines for using SD cards and information on deactivating the demonstration mode.
Lists included accessories and provides instructions on attaching the core filter to cables.
Explains various icons and indicators displayed on the LCD screen during video and still image operations.
Steps for charging the battery pack and initial date/time configuration.
Detailed steps for configuring the clock, area, and daylight saving time.
Instructions on how to change the camcorder's display language settings.
Guidance on adjusting the grip strap and mounting the camcorder on a tripod.
Information on compatible SD cards, insertion, removal, and formatting for optimal performance.
Step-by-step guide for recording video, including mode selection, starting/stopping, and quality settings.
Instructions for switching to still image mode, focusing, and taking pictures.
Explains how to use the zoom function and check the remaining battery power.
Details on controlling the LED light for various shooting conditions.
How to view available recording space and switch between SD card slots.
Guide to assigning recorded files to specific events for easier organization and retrieval.
Steps for selecting video files, playback controls, and adjusting speaker volume.
Instructions for selecting still images, playback controls, and slide show options.
Methods for finding recorded files using group index or date index screens.
How to locate files based on the events they were registered to.
Procedure to play back MPG files, often found in EXTMOV folders due to management information issues.
How to enter manual recording mode and access settings like focus and brightness.
Adjusting backlight compensation to improve exposure in challenging lighting conditions.
Details on adjusting scene modes, manual focus, and brightness levels.
Using shutter speed to control motion blur or freeze action in manual recording.
Adjusting white balance for accurate colors and photometry area for brightness control.
Applying special effects and using the tele macro function for close-up shots.
Steps for connecting the camcorder to a TV via AV cable and initiating playback.
How to capture still frames from video and delete unwanted files from the recording medium.
Step-by-step guide for selecting and deleting specific files from the camcorder.
Instructions on how to delete all files on the recording medium at once.
How to apply protection to individual files to prevent accidental deletion.
Method to protect all files on the recording medium simultaneously.
Steps to protect all files, including releasing protection for selected files.
How to access and view detailed information about recorded files.
Instructions for changing the event registration for individual files or a range of selected files.
Guide to selecting necessary parts of a video and saving them as new files.
Step-by-step process for creating playlists to organize recorded videos by preference.
How to select and play back playlists, including stopping playback and navigating scenes.
Instructions for adding or deleting files within existing playlists and deleting entire playlists.
Overview of copying/moving files between SD card slots and connectable devices like DVD burners or PCs.
Detailed steps for selecting the direction, object, and confirming file transfer between SD card slots.
Information on supported DVD discs and connecting the camcorder to a DVD burner.
Guide to creating a DVD backup by selecting all scenes or unsaved scenes.
Process for automatically copying video files that have not yet been transferred to a DVD.
Options for selecting files by date, event, playlist, or scene, and creating DVD discs.
Steps to play back created DVDs using the camcorder, including disc numbering and title structure.
How to use the digest playback feature to view short clips from recorded videos on a DVD.
Information on installing the PC software, system requirements, and checking PC specifications.
Steps for connecting the camcorder to a PC and performing a backup of recorded files.
Guide on creating custom lists in the PC software to organize files by subject or event.
Instructions for selecting user lists and files to create DVDs from the PC software.
Explanation of the file and folder organization on the recording medium.
Contact details and resources for JVC customer support regarding the software.
Steps for connecting the camcorder to a VCR/DVD recorder and dubbing video content.
Instructions for turning on export mode and setting files for transfer to devices like iTunes.
Steps for connecting the camcorder to a PC and transferring files, including notes on iTunes compatibility.
How to enable upload mode and trim video segments for uploading to platforms like YouTube.
Steps for connecting the camcorder to a PC and uploading files, with requirements for YouTube accounts.
General instructions on how to access and navigate through the camcorder's menu system.
Details on adjusting LED light, registering events, and configuring self-timer/shutter modes.
Adjusting video quality, image quality, zoom ratios, and digital image stabilization settings.
Settings for improving low-light performance, selecting aspect ratios, and reducing wind noise.
Configuring on-screen display, language, date/time formats, and monitor brightness.
Adjusting monitor backlight, enabling/disabling demo mode, and managing auto power off.
Configuring recording button, quick restart, system updates, and factory presets.
Settings for TV display, video output, media slot selection, and SD card formatting.
Solutions for power supply issues, low temperature messages, incorrect battery display, and LCD visibility.
Solutions for recording failures, stops, brightness issues, focus problems, color cast, and slow shooting speed.
Addressing sound/video interruptions, inability to find files, and limitations when playing backup DVDs.
Solutions for slow camcorder operation, charging lamp issues, and problems uploading/exporting files.
Procedure to reset the camcorder to its default settings when it does not operate normally.
Explains various error messages like "SET DATE/TIME!", "FORMAT ERROR!", "MEMORY CARD ERROR!" and their solutions.
Interprets warnings related to damaged files, unsupported files, insufficient space, and quantity limits.
Instructions on how to safely clean the camcorder body, LCD monitor, and lens.
Technical specifications covering power, dimensions, weight, LCD, lens, and connectors.
Details on still image format, video/audio recording formats, and quality settings.
Approximate recording times for video and number of storable images based on card size and quality.
Required charging times and approximate recording durations for different battery packs.
Important warnings regarding AC adapter usage and handling of the lithium-ion battery pack.
Guidelines for preventing data corruption on SD cards and protecting the LCD monitor.
Key safety rules for the main unit, including what not to do to avoid hazards.
Information on regulatory compliance, including FCC rules and Canadian ICES-003.
Legal terms covering copyright, license grant, restrictions, warranty, and liability for the software.
Further details on agreement terms, export control, government user rights, and general provisions.
Instructions on how to properly handle and care for the provided CD-ROM.
