EN
21
T-V LINK
T-V Link Functions
When you connect the unit to your TV via a fully-wired 21-pin SCART cable (
墌
pg. 12), the following functions are available. You can
use these functions only with a TV offering T-V Link, etc.*
For details, refer to the instruction manual of your TV.
* Compatible with TVs offering T-V Link, EasyLink, Megalogic, SMARTLINK, Q-Link or DATA LOGIC via fully-wired 21-pin SCART cable. The degree of
compatibility and available functions may differ by system.
TV Auto Power On
The TV will turn on and be set to its AV mode automatically whenever you play a tape.
For details, refer to the instruction manual of your TV.
VCR Auto Standby
You can use your TV’s remote control to turn off the unit.
For details, refer to the instruction manual of your TV.
Direct Rec (S-VHS deck only)
You can easily start recording the programme that you are watching on your TV. When you use this function, set “DIRECT REC” to
“ON”. (
墌
pg. 72)
To Next Page
Loading...
