JVC KD-APD89 User Manual

Ifa USB device has been attached ...
SOU ACE Playback starts from where it has
a
:) b'ffi ".pp'd '"'00'''
. . • If a different USB device is
currently attached, playback starts
from the beginning.
To stop play and detach the USB device
Straightly pull it out from the unit.
o Press SOURCE to listen to another playback source.
You can operate the USB device in the same way you
operate the files on a disc. (See pages 10 and 11.)
• You can listen to WAY files by following the MP31
WMA files operations listed on pages 10 and 11.
Cautions:
• Avoid using the USB device if it might hinder your
safety driving.
• Do not pull out and attach the USB device repeatedly
while "Reading" is shown on the display.
o Do not start the car engine if a USB device is
connected.
o This unit may not be able to play the files depending
on the type of USB device.
o Operation and power supply may not work as
intended for some USB devices.
o You cannot connect a computer to the USB input
terminal of the unit.
o Make sure all important data has been backed up to
avoid losing the data.
• Do not leave a USB device in the car, expose to direct
sunlight, or high temperature to avoid deformation
or cause damages to the device.
o Some USB devices may not work immediately after
you turn on the power.
o For more details about USB operations, see pages 3S
and 36.
Using the Bluetooth@ devices
For Bluetooth operations, it is required to connect the
Bluetooth Adapter (KS-BTA200) to the CD changer
jack on the rear of this unit.
o Refer also to the instructions supplied with the
Bluetooth adapter and the Bluetooth device.
• Refer to the list (included in the box) to check
the countries where you may use the Bluetooth@
function.
To use a Bluetooth device through the unit
("BT -PHONE" and "BT-AUDIO") for the first time,
you need to establish Bluetooth wireless connection
between the unit and the device.
o Once the connection is established, it is registered in
the unit even if you reset your unit. Up to five devices
can be registered in total.
o Only one device can be connected at a time for each
source ("BT-PHONE" and "BT -AUDIO").
Registering a Bluetooth device
Registration (Pairing) methods
Use either of the following items in the Bluetooth menu
to register and establish the connection with a device.
o Select "BT -PHONE" or "BT -AUDIO" as the source to
operate the Bluetooth menu.
Open Make the unit ready to establish a new
Bluetooth connection.
Connection is established by operating the
Bluetooth device.
Search Make the unit ready to establish a new
Bluetooth connection.
Connection is established by operating
the unit.
o When _ is shown on the display, you can
move back to the previous screen by pressing number
bunon 3.
_ 12
OPERATIONS & EXTERNAL DEVICES

JVC KD-APD89 Specifications

General

Brand	JVC
Model	KD-APD89
Category	Car Receiver
Language	English