JVC KD-APD89 User Manual

3 Select a source.
All Source*l -. CD -. Changer*3 (or
Ext In*2) -. USB*3 -. FM -. AM -.
Sirius*3j)(M*3 -. iPod*3 -. Aux In -.
BT Phone*3 -. BT Audio*3 -. (back to the
beginning)
Creating your own color-User Color
You can create your own colors-"Day Color" or
"NightColor."
1 Follow steps 1 to 3 on page 27.
• In step 2, select "COLOR."
• In step 3, select "Color Set."
2 Select "Day Color" or "NightColor."
SOURCE
7
-
Day Color --- NightColor
3 Select a primary color.
e Red -- Green -- Blue "1
SOURCE
*1 When you select "All Source," you can use the
same color for all the sources.
*2 Depends on the "Ext Input" setting, see page 29.
*3 Displayed only when the target component is
connected.
4 Select a color.
[Turn]
Pale -. Aqua -. Sky -. Sea -. Leaves
-. Grass -. Apple -. Rose -. Amber-'
Honey -. Violet -. Grape -. Every*4 -.
User*5 -. (back to the beginning)
*4 The color changes every 2 seconds.
*5 The user-edited colors-"Oay Color" and
"NightColor" will be applied (see the right
column for details).
4 Adjust the level (00 to 11) of the selected
primary color.
iIV
5 Repeat steps 3 and 4 to adjust other primary
colors.
6 Exit from the setting.
SEL
~
5 Repeat steps 3 and 4 to select the color for
each source (except when selecting "All
Source" in step 3).
6 Exit from the setting.
SEL
SETIINGS
31 _

JVC KD-APD89 Specifications

General

Brand	JVC
Model	KD-APD89
Category	Car Receiver
Language	English