JVC KD-APD89 User Manual

Bluetooth settings
You can change the settings listed on the right column
according to your preference.
• When II1II is shown on the display, you can
move back to the previous screen by pressing number
button 3.
1 Select "BT -PHONE" or "BT -AU 010."
SOURCE
2 Enter the Bluetooth menu.
MODE
-
3 Select "Setting."
Setting menu (_: Initial)
• Auto Connect
When the unit is turned on, the connection is
established automatically with ...
Off: No Bluetooth device.
Last: The last connected Bluetooth device.
Order: The available registered Bluetooth device
found at first.
• Auto Answer
Only for the device being connected for "BT -PHONE."
On: The unit answers the incoming calls
automatically.
Off: The unit does not answer the calls
automatically. Answer the calls manually.
Reject: The unit rejects all incoming calls.
4 Select a setting item.
SOURCE
[Turn] lit
7
• Message Info
Only for the device being connected for "BT -PHONE."
Auto: The unit informs you of the arrival of
a message by ringing and displaying
"Received Message."
Manual: The unit does not inform you of the arrival of
a message.
Auto Connect • • Auto Answer *1
~ ~
Version*3 -- MIC Setting*1 -- Message Info *2
*1 Displayed only when a Bluetooth phone is
connected.
*2 Displayed only when a Bluetooth phone is
connected and it is compatible with text
message.
*3 Bluetooth Audio: Shows only "Version."
5 Change the setting accordingly.
• MIC setting (microphone setting)
Only for the device being connected for "BT -PHONE."
Adjust the built-in microphone volume,
[LEVEL 01/02/03].
.. Version
The Bluetooth software and hardware versions are
shown.
SOURCE
_ 32
[Turn] iIIt
~
~:IBII!ID
7
".",

JVC KD-APD89 Specifications

General

Brand	JVC
Model	KD-APD89
Category	Car Receiver
Language	English