JVC KD-APD89 - Select Acategory; Storing Channels in Memory

SOURCE Select "SIRIUS" or "XM."
a
Select the bands.
SIRIUS: [SR1 SR2 SR3 J
XM: [XM1 XM2
XM3
l
Select a category.
SIRIUS: If you select "ALL," you can tune in to all the channels of all categories.
Select a channel to listen .
• Holding the button changes the channels rapidly .
•
While searching, invalid and unsubscribed channels are skipped.
XM: If you do not select a channel within 1S seconds, category selected in step 3
is canceled. You can select all channels of all categories now (including non-
categorised channels).
Checking the XM Satellite radio ID
While selecting "XM1:' "XM2," or ''XM3,'' select
"Channel 0:'
The display alternately shows "RADIO 10" and the
8-digit (alphanumeric) 10 number.
To cancel the ID number display, select any channel
other than "Channel 0."
To change the display information while
listening to a channel
\-/i
Category name - Channel name - Artist!
composer* name - Song/program name -
Audio level meter - (back to the beginning)
* Only for SIRIUS Sotellite rodio.
_20
Storing channels in memory
You can preset six stations for each band .
•
When IBI is shown on the display, you can
move back to the previous screen by pressing number
button 3.
•
When 1!!:!!I/lI!!!!S is shown on the display,
you can move to the other lists by pressing number
button 5 or 6 repeatedly.
Ex.: Storing a SIRIUS channel into preset number 4 of
the SR1 band.
1 Tune in to a channel you want to listen to.
• By holding BAND button, the Preset Channel List
will appear (go to step S).
2 MODE
o
3 Select "LIST:'
..
12