JVC KD-APD89 User Manual

Listening to the iPod
You can play songs in an Apple iPod by:
- Connecting it with the USB cable supplied with your iPod to the USB input jack on the control panel.
- Connecting the Interface adapter for iPod, KS-PD100 (separately purchased) to the CD changer jack on the rear of
the unit.
Preparation: Make sure "Changer" is selected for the external input setting, see page 29.
• You can control playback from the unit.
• Disconnecting the iPod will stop playback. Press SOURCE to listen to another playback source.
• For details, refer also to the manual supplied for your iPod.
Caution:
• Avoid using the iPod ifit might hinder your safety while driving.
• Make sure all important data has been backed up to avoid losing the data.
Connect an iPod to the USB input jack or through KS·PD100.
Playback starts automatically from where it had been paused previously .
• If an iPod has been connected, press SOURCE to select "USB-iPod" or "iPod" as
the playback source.
Select a track.
Adjust the volume and sound as you want. (See pages 2S and 26.)
Playback control from the unit
Button For iPod connected through For iPod connected to the USB input jack
KS-PD100
~
[Press] Go to the next or previous [Press]
Go to the next or previous track
track
[Hold]
Fast-forward or reverse the track during playback
[Hold] Fast-forward or reverse
the track during playback
~
[Press]
Enter main menu when
[Hold]
Enter main menu
~
you press .... Pause/ [Press] Go to the top menu of "Playlists," "Artists,"
resume playback when T
"Albums,"I1S
ongs
,"I1Podcasts," "Genres,"
is pressed.
"Composers," or "Audio books" in the main menu .
•
Pressing the number buttons (1 - 6) or holding
1 (7) and 2 (8) can also select the preset top
menus.
&M7J
[Press]
Pause/resume playback.
_ 22

JVC KD-APD89 Specifications

General

Brand	JVC
Model	KD-APD89
Category	Car Receiver
Language	English