JVC KD-APD89 - HD Radio Reception; Satellite Radio

Warning messages for Bluetooth operations
• Connection Error:
The device is registered but the connection has failed.
Use "Connect" to connect the device again. (See page
14.)
• Error
Try the operation again. If "Error" appears again,
check if the device supports the function you have
tried.
• Device Not Found
No available Bluetooth device is detected by
"Search ".
• Loading .
The unit is updating the phone book and/or text
messages.
• Please Wait •••
The unit is preparing to use the Bluetooth function. If
the message does not disappear, turn off and turn on
the unit, then connect the device again (or reset the
unit).
• Reset08
Check the connection between the adapter a'nd this
unit.
.. HD Radio reception
• HD Radio can normally be received in the USA,
but it may also be received in countries where test
broadcasting has already started.
• During SSM search ...
- All stations including conventional FM/AM stations
are searched and stored for the selected band.
.. Satellite radio
• You can also connect the JVC SIRIUS radio PnP
(Plug and Play), using the JVC SIRIUS radio adapter,
KS-U100K (not supplied) to the CD changer jack on
the rear.
By turning on/off the power of the unit, you can turn
on/off the JVC PnP. However, you cannot control it
from this unit.
• To know more about SIRIUS Satellite radio or to sign
up, visit <http://www.sirius.com>.
• For the latest channel listings and programming
information, or to sign up for XM Satellite radio, visit
< http://www.xmradio.com >.
.iPod
• Controllable iPod (connected through .... ):
(A) KS-PD100:
- iPod with dock connector (3rd Generation)
- iPod with click wheel (4th Generation)
- iPod nano (1st & 2nd*1 Generation)
- iPod mini (1st Generation)
- iPod video (5th Generation)*2
- iPod photo
(B) USB input jack:
- iPod nano (1 st & 2nd Generation)
- iPod video (5th Generation)
*1 When you connea the iPod nano to the interface
adapter, be sure to disconnect the headphones;
otherwise, no sound is heard.
*2 It is not possible to browse video files on the "Videos"
menu while the iPod is connected to the interface
adapter.
• Update your iPod to the latest software version
before using it with this unit.
- You can check the software version of your iPod
under "About" in the "Setting" menu of the iPod.
- For details about updating your iPod, visit
<http://www.apple.com>.
• While the unit is being turned on, the iPod is charged
through this unit.
• While connecting an iPod with Video:
- No video shows on the iPod's display or the
external monitor (only the audio part is available) .
-
It is not possible to browse video files on the
"Video" menu. (If you connect the iPod during
the playback or pausing of a video file, resuming
playback will not work.)
• iPod shuffle and iPhone cannot be used with this
unit.
REFERENCE
Continued on the next page
37 _