JVC KD-APD89 - Storing Your Own Sound Modes

[]] Turn the control dial to adjust the
subwoofer output level. [0 to 8]
[I] Press number button 1 0_)
to select the subwoofer phase.
[Odeg (normal) or 180deg (reverse)]
© VolAdjust, [-5 to +5]
Turn the control dial to adjust the input level
of each source (except FM).
Adjust to match the input level of the FM
sound level.
• Before making an adjustment, select the
source you want to adjust.
@ Loudness, [Off or On]
Turn the control dial to select "Off" or
"On." When "On" is selected, low and high
frequencies sound are boosted to produce a
well-balanced sound at low volume level.
4 Exit from the setting.
SEL
4 Adjust the sound elements of the selected
frequency range.
D] Use .... / T to adjust the level.
W Press number button 5 (_), then turn
the control dial to select the frequency.
[I] Press number button 5 (_), then turn
the control dial to select the quality slope (Q).
Sound
Range/selectable items
elements
Low
Mid
High
Frequency
60 Hz 500 Hz
10 kHz
80 Hz
1 kHz
12.5 kHz
100 Hz 1.5 kHz 15 kHz
200 Hz 2.5 kHz
17.5 kHz
Level
-6 to +6 -6to +6 -6to+6
Q
Q1.0 QO.5 Fix
Ql.25 QO.75
Ql.5
Ql.0
Q2.0 Ql.25
2 Select a sound mode.
... _----
7 8 9 10 " 12
4JIlJI8fIJ ..... (fJIII'"
10
•• Jtf
..
...
10
6 Store the adjustments.
II1II
5 Repeat steps 3 and 4 to adjust the other
frequency bands.
SEL
or
1 I.
II Storing your own sound modes
You can adjust the sound modes and store your own
adjustments in memory.
• When II1II is shown on the display, you can
move back to the previous screen by pressing number
button 6.
3 Select a frequency range.
_ 26