JVC KD-APD89 User Manual

• No sound can be heard when connecting an • Disconnect the headphones from the iPod nano.
iPod nano. • Update the firmware version of the iPod nano.
_44
Symptoms
• "OFF AIR" appears on the display while
listening to the XM Satellite radio.
• "---" appears on the display for about
2 seconds, then returns to the prevlous
channel while listening to the XM Satellite
radio.
• "LOADING" appears on the display while
listening to the XM Satellite radio.
• "Reset 08" appears on the display.
• Satellite radio does not work at all.
• The iPod does not tum on or does not work.
• The sound is distorted.
• "Disconnect" appears on the display.
• Playback stops.
• "No File" appears on the display.
• "Reset 01" - "Reset 07" appears on the
display.
• The iPod's controls do not work after
disconnecting from this unit
Remedies/Causes
Selected channel is not broadcasting at this time.
Select another channel or continue listening to the
previous channel.
Selected channel is no longer available or is
unauthorized.
Select another channel or continue listening to the
previous channel.
The unit is loading the channel information and audio.
Text information are temporarily unavailable.
The unit is loading the channel information and audio.
Text information are temporarily unavailable.
Reconnect this unit and the satellite radio correctly, then
reset the unit.
• Check the connecting cable and its connection.
• Update the firmware version.
• Charge the battery.
Deactivate the equalizer either on this unit or the iPod.
• Check the connecting cable and its connection.
• Charge the battery.
The headphones are disconnected during playback.
Restart the playback operation (see page 22).
No tracks are stored. Import tracks to the iPod.
Disconnect the adapter from both this unit and iPod.
Then, connect it again.
Check the connection between the adapter and this unit.
Reset the iPod.

JVC KD-APD89 Specifications

General

Brand	JVC
Model	KD-APD89
Category	Car Receiver
Language	English