ENGLISH
17
Turning on/off the BBE
II
function
The BBE
II
* function restores the brilliance and clarity of the original live sound in recording,
broadcasts, etc.
When a speaker reproduces sound, it introduces frequency-dependent phase shifting, causing
high-frequency sounds to take longer to reach the ear than low frequency sounds. The BBE
II
function adjusts the phase relationship between the low, mid and high frequencies by adding
a progressively longer delay time to the low and mid frequencies, so that all frequencies
reach the listener’s ears at the proper time.
In addition, the BBE
II
function boosts low and high frequencies, which loudspeakers tend to
be less efficient in reproducing, through dynamic, program-driven augmentation. When
combined with the phase compensation feature, the resulting sound has a clearer, more
finely detailed “live” presence.
Each time you press BBE, the BBE
II
function changes as follows.
As the number gets higher, the BBE
II
function becomes stronger.
When shipped from the factory, the BBE
II
function is set to “BBE 2.”
To cancel the BBE
II
function, select “BBE OFF.”
* Under license from BBE Sound, Inc.
R
is a trademark of BBE Sound, Inc.
BBE
BBE 1 BBE 2 BBE 3 BBE OFF
EN16-20.KD-LX30[J]/1 99.12.21, 3:31 PM17
To Next Page
Loading...
Need help?
General
