JVC KD-LX30 User Manual

8
ENGLISH
1
Select the FM band number (FM1, FM2 or
FM3) you want to store FM stations into.
1 Press SOURCE (ATT) to select the tuner as the
source.
2 Press BAND to select the band (FM1, FM2, or FM3).
2
Press and hold both buttons for more than
2 seconds.
Local FM stations with the strongest signals are searched and stored automatically in the
band number you have selected (FM1, FM2 or FM3). These stations are preset in the number
buttons — No. 1 (lowest frequency) to No. 6 (highest frequency).
When automatic preset is over, the station stored in number button 1 will be automatically
tuned in.
Storing stations in memory
You can use one of the following two methods to store broadcasting stations in memory.
• Automatic preset of FM stations: SSM (Strong-station Sequential Memory)
• Manual preset of both FM and AM stations
FM station automatic preset: SSM
You can preset 6 local FM stations in each FM band (FM1, FM2 and FM3).
1
2
“SSM” appears, then disappears when automatic preset is over.
1- 1 2 1- 2
FM1 FM2 FM3 AM
EN06-10.KD-LX30[J]/1 99.12.21, 3:19 PM8

JVC KD-LX30 Specifications

General

Brand	JVC
Model	KD-LX30
Category	Car Stereo System
Language	English