JVC KD-LX30 User Manual

9
ENGLISH
Manual preset
You can preset up to 6 stations in each band (FM1, FM2, FM3 and AM) manually.
EXAMPLE: Storing an FM station of 88.3 MHz into the preset number 1 of the FM1 band
1
Select the band.
1 Press SOURCE (ATT) to select the tuner as the source.
2 Press BAND to select the FM1 band.
2
Tune into a station of 88.3 MHz.
See page 6 to tune into a station.
3
Press and hold the number button (in this example, 1)
for more than 2 seconds.
4
Repeat the above procedure to store other stations into other
preset numbers.
Notes:
• A previously preset station is erased when a new station is stored in the same preset number.
• Preset stations are erased when the power supply to the memory circuit is interrupted (for example,
during battery replacement). If this occurs, preset the stations again.
1
2
23
1- 1 1- 2
FM band number and “MEMO”
appear alternately for a while.
EN06-10.KD-LX30[J]/1 99.12.21, 3:19 PM9

JVC KD-LX30 Specifications

General

Brand	JVC
Model	KD-LX30
Category	Car Stereo System
Language	English