JVC KD-LX30 User Manual

20
ENGLISH
Storing your own sound adjustments
You can adjust the sound modes (BEAT, SOFT, POP: see page 18) to your preference and
store your own adjustments in memory.
1
Light “MODE” on the lower part of the display.
The number buttons can work as different function buttons.
REMEMBER you must finish the following steps while “MODE”
is still on the display. Otherwise, the setting will be canceled.
2
Select the sound mode you want.
For details, see page 18.
3
To adjust the bass or treble level
1 Select “BAS” or “TRE.”
2 Adjust the bass or treble level.
To turn on or off the BBE
II
function
See page 17.
4
Press and hold SCM until the sound mode you have
selected flashes on the display.
Your adjustment made for the selected sound mode is stored in memory.
5
Repeat the same procedure to adjust other sound modes.
To reset to the factory settings
Repeat the same procedure and reassign the preset values listed in the table on page 18.
12,4 33- 2 3- 1
12
EN16-20.KD-LX30[J]/1 99.12.21, 3:31 PM20

JVC KD-LX30 Specifications

General

Brand	JVC
Model	KD-LX30
Category	Car Stereo System
Language	English