JVC KD-R728BT - Audio Settings and Sound Modes; Choosing and Applying Preset Sound Modes; Customizing and Storing Sound Settings

22 ENGLISH
Storing your own sound mode
You can store your own adjustments in
memory.
1
2
] <PRO EQ> ] <BASS/ MIDDLE/
TREBLE>
3
] Adjust the sound elements (see table
below) of the selected tone.
4
Repeat steps 2 and 3 to adjust other
tones.
The adjustments made is automatically
stored and changed to “USER.”
Sound element
BASS [ Initial: 50 Hz, 00, Q1.0 ]
Frequency: 50/ 100/ 200 Hz
Level: –06 to +06
Q: Q0.7/ 1.0/ 1.4/ 2.0
MIDDLE [
Initial: 1.0 kHz, 00, Q1.0 ]
Frequency: 0.5/ 1.0/ 2.0 kHz
Level: –06 to +06
Q: Q0.7/ 1.0/ 1.4/ 2.0
TREBLE [
Initial: 10 kHz, 00, Q1.0 ]
Frequency: 5/ 10/ 15 kHz
Level: –06 to +06
Q: Q0.7/ 1.0/ 1.4/ 2.0
[Hold]
You can select a preset sound mode suitable
for the music genre.
FLAT = NATURAL =
DYNAMIC = VOCAL BOOST
= BASS BOOST = USER =
(back to the beginning)
While listening, you can adjust the subwoofer
level and tone level of the selected sound
mode.
1
2
] Adjust the level:
SUB.W : 00 to 08
BASS/ MID/ TRE : –06 to +06
The sound mode is automatically stored
and changed to “USER.”
Selecting a preset sound mode
[Hold]
EN02-29_KD-R728BT[J]_f.indd 22EN02-29_KD-R728BT[J]_f.indd 22 1/12/11 4:47:43 PM1/12/11 4:47:43 PM