23ENGLISH
Menu operations
1
If no operation is done
for about 60 seconds, the
operation will be canceled.
2 3
Repeat step 2 if necessary.
• To return to the previous
menu, press BACK.
• To exit from the menu, press
MENU.
Menu item
Selectable setting, [
Initial: Underlined
]
DEMO
ON
:
Display demonstration will be activated automatically if no operation is done for
about 20
seconds. /
OFF
:
Cancels. (page 4)
CLOCK
CLOCK SET
For settings, see page 4.
DIMMER
DIMMER SET AUTO
:
Changes the display and button illumination between the Day/Night
adjustments in <BRIGHTNESS> setting when you turn off/on the car headlights
*
1
. /
ON
:
Selects the Night adjustments in <BRIGHTNESS> setting for the display and
button illumination. /
OFF
:
Selects the Day adjustments in <BRIGHTNESS> setting for
the display and button illumination.
BRIGHTNESS DAY
[
31
] /
NIGHT
[
15
] : Customizes the display and button illumination brightness
level [
00
—
31
] for day and night.
DISPLAY
SCROLL *
2
ONCE
: Scrolls the displayed information once. /
AUTO
: Repeats scrolling (at
5-second intervals). /
OFF
: Cancels.
(Pressing
DISP
for more than one second can scroll the display regardless of the
setting.)
TAG DISPLAY ON
: Shows the Tag information while playing MP3/WMA/WAV tracks. /
OFF
: Cancels.
PRO EQ
For settings, see page 22.
AUDIO
FADER *
3,
*
4
R06 — F06
[
00
] : Adjusts the front and rear speaker output balance.
BALANCE *
4
L06 — R06
[
00
] : Adjusts the left and right speaker output balance.
LOUD ON
: Boost low and high frequencies to produce a well-balanced sound at a low volume
level. /
OFF
: Cancels.
VOL ADJUST –05 — +05
[
00
] : Presets the volume adjustment level of each source (except
“FM”), compared to the FM volume level. The volume level will automatically increase or
decrease when you change the source. Before adjustment, select the source you want to
adjust. (“VOL ADJ FIX” appears on the display if “FM” is selected as the source.)
*
1
The illumination control lead connection is required. (See “Installation/Connection Manual.”) This setting
may not work correctly on some vehicles (particularly on those having a control dial for dimming). In this
case, change the setting to any other than <DIMMER AUTO>.
*
2
Some characters or symbols will not be shown correctly (or will be blanked) on the display.
*
3
If you are using a two-speaker system, set the fader level to <00>.
*
4
This adjustment will not affect the subwoofer output.
[Hold]
Continued...
EN02-29_KD-R728BT[J]_f.indd 23EN02-29_KD-R728BT[J]_f.indd 23 1/12/11 4:47:43 PM1/12/11 4:47:43 PM
To Next Page
Loading...
Need help?
General
