JVC KD-R728BT - Understanding Unit Controls; Main Unit Control Panel Overview; Remote Control Functions Mapping

6 ENGLISH
Basic operations
Control dial
Ejects the disc
Loading slot
Remote sensor
• DO NOT expose to
bright sunlight.
Display window
AUX (auxiliary) input jack
Detaches the panel
When you press or hold the following button(s)...
Main unit
Remote
controller
General operation
/ SOURCE
—
• Turns on.
• Turns off [Hold].
SOURCE
Selects the available sources (if the power is turned on).
• If the source is ready, playback also starts.
Control dial
(turn)
VOL – / + Adjusts the volume level.
— Selects items.
Control dial
(press)
Mutes the sound or pauses during playback.
• Press the button again to cancel muting or resume playback.
— Confirms selection.
EQ SOUND
Selects the sound mode.
• Hold the EQ button on the main unit to enter tone level adjustment
directly. (page 22)
—
• Enters “Hands-Free” screen or answers incoming call when the unit
rings. (page 13, 15)
• Ends a call [Hold].
BACK —
• Selects the controlling terminal of an iPod/iPhone [Hold]. (page 18)
• Returns to the previous menu.
DISP —
• Changes the display information.
• Scrolls the display information [Hold].
USB (Universal Serial
Bus) input terminal
EN02-29_KD-R728BT[J]_f.indd 6EN02-29_KD-R728BT[J]_f.indd 6 1/12/11 4:47:39 PM1/12/11 4:47:39 PM