EasyManuals Logo

JVC KD-SH1000 Instruction Manual

JVC KD-SH1000
282 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Page #244 background imageLoading...
Page #244 background image
12
ENGLISH
5 Store the setting.
6 To store other PTY codes into other
preset numbers.
7 Finish the procedure.
Using the standby receptions
TA Standby Reception
TA Standby Reception allows the unit to switch
temporarily to Traffic Announcement (TA)
from any source other than AM.
The volume changes to the preset TA volume
level if the current level is lower than the preset
level (see page 24).
If DAB tuner is connected, Standby Reception
also works to search for a DAB service
broadcasting Traffic Announcement.
To activate TA Standby Reception
The TP (Traffic Programme)
indicator either lights up or
flashes.
If the TP indicator lights up, TA Standby
Reception is activated.
If the TP indicator flashes, TA Standby
Reception is not yet activated. (This occurs
when you are listening to an FM station
without the RDS signals required for TA
Standby Reception.)
To activate TA Standby Reception, tune in
to another station (or DAB service) providing
the related signals. The TP indicator will stop
flashing and remain lit.
Repeat steps 2 to 5.
To deactivate the TA Standby Reception
The TP indicator goes off.
PTY Standby Reception
PTY Standby Reception allows the unit to
switch temporarily to your favorite PTY
programme from any source other than AM.
If DAB tuner is connected, Standby Reception
also works to search for a DAB service.
To select your favorite PTY code for PTY
Standby Reception, see page 24.
The PTY indicator either lights up or flashes.
To activate the PTY Standby Reception
1 Enter the MODE menu (see page 4).
2
3 Select one of the PTY codes.
4 Finish the procedure.
The PTY indicator either lights
up or flashes.
If the PTY indicator lights up, PTY
Standby Reception is activated.
If the PTY indicator flashes, PTY Standby
Reception is not yet activated.
To activate PTY Standby Reception, tune
in to another station providing these
signals. The PTY indicator will stop
flashing and remain lit.
To deactivate the PTY Standby Reception,
select “Off” in step 3. The PTY indicator goes
off.
EN10-17_SH1000E_003A_f.indd 12EN10-17_SH1000E_003A_f.indd 12 1/16/06 3:41:48 PM1/16/06 3:41:48 PM
All manuals and user guides at all-guides.com

Table of Contents

Other manuals for JVC KD-SH1000

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the JVC KD-SH1000 and is the answer not in the manual?

JVC KD-SH1000 Specifications

General IconGeneral
BrandJVC
ModelKD-SH1000
CategoryCar Receiver
LanguageEnglish

Related product manuals