18
ENGLISH
To make more precise settings, see the
following.
To cancel the acoustic effect, select “Defeat” in
step Ÿ.
Precise settings for the DSP modes
1 Select a DSP mode.
2 Select the number of the built-in
speakers.
• For “Defeat” and “V.Cancel,” the speaker
number is fixed to “4ch.”
3 Select your listening seat position.
4 Select the speaker to be adjusted.
* Appears only when “4ch” is selected in step
2.
Sound adjustments
Selecting the DSP modes (DSP)
You can create a more acoustic sound field such
as in a theater, hall, etc.
• When crossover network (see page 21) is
activated, the DSP mode is fixed to “Defeat.”
DSP modes
Defeat (No acoustic effect is applied), Theater, Hall,
Club, Dome, Studio, V.Cancel (Voice Cancel: Reduces the
vocal sounds. Good for mastering your favorite songs—
Karaoke.)
~ Enter the DSP menu (see page 4).
Ÿ Select one of the DSP modes.
• To finish the procedure
• To adjust the effect level
For “Defeat” and “V.Cancel,” the effect
level is not adjustable.
! Adjust the effect level.
• To finish the procedure
Go to step !.
EN18-23_SH1000E_003A_f.indd 18EN18-23_SH1000E_003A_f.indd 18 1/16/06 3:56:55 PM1/16/06 3:56:55 PM
To Next Page
Loading...
Need help?
General
