23
ENGLISH
3 Select or adjust the selected PSM item.
4 Repeat steps 2 and 3 to adjust the
other PSM items if necessary.
5 Finish the procedure.
You can change PSM (Preferred Setting Mode)
items listed in the table that follows.
1 Enter the PSM menu (see page 4).
2 Select a PSM item.
General settings — PSM
Indications Items Settings, [reference page]
Demo
Display demonstration
• On [Initial]
• Off
: Display demonstration will be activated automatically if no
operation is done for about 20 seconds, [8].
: Cancels.
Anime
Animation
• On [Initial]
• Off
: An animation screen appears when you turn on or off the power,
change the source, and when you select an EQ, MENU, or DSP.
: Cancels.
Clock H
Hour adjustment
0 – 23 (1 – 12)
[Initial: 0 (0:00)]
: See also page 8 for setting.
Clock M
Minute adjustment
00 – 59
[Initial: 00 (0:00)]
: See also page 8 for setting.
24H/12H
Time display mode
• 12Hours
• 24Hours [Initial]
: See also page 8 for setting.
CLK Adj
Clock adjustment
• Auto [Initial]
• Off
: The built-in clock is automatically adjusted using the CT (clock
time) data in the RDS signal.
: Cancels.
Scroll
*
1
• Once [Initial]
• Auto
• Off
: For track information: scrolls the track information once.
For RDS Radiotext: scrolls the text message continuously.
For DAB text: scrolls the detailed DAB text.
: For track information: repeats scrolling (in 5-second intervals in
between).
For RDS Radiotext: scrolls the text message continuously.
For DAB text: scrolls the detailed DAB text.
: For track information: cancels.
For RDS Radiotext: shows only the first page of the text message.
For DAB text: shows only headline if any.
Continued on the next page
EN18-23_SH1000E_003A_f.indd 23EN18-23_SH1000E_003A_f.indd 23 1/12/06 4:42:17 PM1/12/06 4:42:17 PM
To Next Page
Loading...
Need help?
General
