30
ENGLISH
4 Finish the procedure.
• The DRC indicator will be highlighted
only when receiving DRC signals from the
tuned service.
To search for your favorite service
You can search for either Dynamic or Static
PTY codes.
• Operations are exactly the same as explained
on pages 11 and 12 for FM RDS stations.
• You cannot store PTY codes separately for the
DAB tuner and the FM tuner.
• Search will be performed on the DAB tuner
only.
Storing DAB services in memory
You can preset six DAB services (primary) for
each band.
1 Select a service you want.
2 Enter the MODE menu (see page 4).
3 Select “List.”
4 Select a preset number.
• You can move to the lists of the other
DAB bands, but cannot store a service for
the other bands.
⁄ Select a service (either primary or
secondary) to listen to.
To tune in to an ensemble manually
Start searching for an ensemble, as in step !...
1
2 Select a desired ensemble frequency.
When surrounding sounds are noisy
Some service provides Dynamic Range Control
(DRC) signals together with their regular
programme signals. DRC will reinforce the low
level sounds to improve for your listening.
1 Enter the MODE menu (see page 4).
2 Select “DRC.”
3 Select one of the DRC signal levels (1,
2, or 3).
The reinforcement level increases from 1
to 3.
EN24-35_SH1000E_003A_3.indd 30EN24-35_SH1000E_003A_3.indd 30 12/30/05 5:35:50 PM12/30/05 5:35:50 PM
To Next Page
Loading...
Need help?
General
