JVC KW-AV70BT - Model Specific: KW-AV70 BT iPhone;iPod Users

KW-AV708T
iPhone/iPod users:
PLEASE READ THIS BEFORE USING YOUR NEW UNIT
You have two options when connecting an
iPhone or an iPod to your new unit:
• Option 1 (Default Setting):
Using the optional JVC KS-U30
Your unit is pre-set from the factory to allow
audio and video playback when you connect
your iPhone
or iPod using the optional JVC KS-U30
cable (Sold Separately). If you purchased the KS -
U30, simply
connect your iPhone or iPod using
Setting <AV Input> for iPod/iPhone playback
• Make sure that " AV Off " is selected as the rear source.
this optional cable.
• Option 2:
If you wish to connect your iPhone or iPod with
white 30-Pin iPod USB Cable (this is the white
CD
cable that is supplied with your iPhone or iPod), ®
you will need to follow the simple steps below to
assure audio playback:
Please go to [AV Menu]>> Select [AV Off]>>
Select [AV MENU]>> Select [Settings]>>
[Input], then select [AV-IN] at "AV Input" Menu.
Important Notice:
When using white 30-Pin iPod USB Cable, audio
signal does
not come through via USB ifyou
select " iPod' ~ You must select "AV-IN" when using
your
white 30-Pin iPod USB Cable.
Settings Audio Display lnpu• S"~tem
• Fader/Balance 0/0