JVC KW-AV70BT - Model Specific: KW-AV60 BT;AV60;ADV64 BT iPhone;iPod Users; Option 1: Using Optional JVC KS-U30 Cable

KW-AV60BTIKW-AV60/KW-ADV64BT
iPhone/iPod users:
PLEASE READ THIS BEFORE USING YOUR NEW UNIT
You have two options when connecting an
iPhone or an iPod to your new unit:
• Option 1 (Default Setting):
Using the optional JVC KS-U30
Your unit is pre-set from the factory to allow
audio and video playback when you connect Setting <AV Input> for iPod / iPhone playback
your iPhone or iPod using the optional JVC KS-U30 G)
cable (Sold Separately). If you purchased the KS -
U30,
simply connect your iPhone or iPod using
this
optional cable.
• Option 2:
If you wish to connect your iPhone or iPod with
white 30-Pin iPod USB Cable (this is the white
cable that is supplied with your iPhone or iPod),
you
will need to follow the simple steps below to
assure audio playback:
Please
go to [AV Menu]>> Select [AV Off]>>
Select [AV MENU]>> Select [Settings]>>
[Input], then select [AV-IN] at "AV Input" Menu.
Important Notice:
When using white 30-Pin iPod USB Cable, audio
signal does
not come through via USB if you
select " iPod'~ You must select" AV-IN " when using
your white 30-Pin iPod USB Cable.
VMenu
:: Prone
01, ~
Suausxm
0
~
l
IUNEi
\u:t U~lt• [JI\f
U\r.
1f!r.d
ettin s Aud~~- Display lnpu·~s~~~tem
• Fade• /Balance 0/0
-----