ENGLISH
12
Installation settings
When you turn on the unit for the first time, the initial
setup screen appears.
1 Turn on the ignition switch.
The power of the unit is turned on.
2 Select the language you want for the display
and the voice guidance.
• You can also select the system language through
<Settings> - <System> - <Region> -
<Language>. (☞ page 84)
3 Set the installation settings (1), then press
[OK] (2).
State/
Province
Select the State or Province where
you are now.
Time Zone * Select your residential area for
automatic clock adjustment by
GPS signal.
DST * Select [Auto] if your residential
area is subject to Daylight Saving
Time.
Camera
Input *
Select [On] when connecting the
rear view camera to the CAMERA
IN jack.
* You can also change these settings through
<Settings> - <System>. (☞ pages 85, 86)
EN_KW-NT810HDT[J].indb 12 11/8/2012 2:51:10 PM
To Next Page
Loading...
