JVC KW-V640BT - Page 19

TunerTuner
8 Indicators
• NEWS: Lights up when News Standby Reception
is activated.
• AF: Lights up when Network-Tracking Reception
is activated.
• TI: Lights up in white when receiving the traffic
information, and lights in orange when Traffic
Information Reception is on standby.
• LO.S: Lights up when Local Seek is activated.
• ST: Lights up when receiving a stereo broadcast.
• MONO: Lights up when receiving stations in
monaural forcibly.
• RDS: Indicates the status of the Radio Data
System station reception when the Network-
Tracking Reception is activated. (Page 18)
−Lights in white: Radio Data System station is
being received.
−Lights in orange: Radio Data System station is
not being received.
• EON: Lights up when a Radio Data System station
is sending EON signals.
* See the following “Operation keys on source control screen”.
Operation keys on source control screen
• The appearance of the operation keys may differ,
however the similar operation keys have the same
operations.
• See also “Common operation keys on source control
screen” on page 8.
Touching the operation keys performs the following
actions:
5
[TI]* (For FM Radio Data System features)
Activates TI standby reception mode.
• When TI is activated, the unit is ready
to switch to traffic information if
available. The TI indicator lights up in
white.
• If the TI indicator lights up in orange,
tune into a station providing Radio
Data System signals.
• The volume adjustment for traffic
information is automatically
memorized. The next time the unit
switches to traffic information, the
volume is set to the memorized level.
• To deactivate, touch [TI] again.
[MONO]* Activates monaural mode for better FM
reception (stereo effect will be lost).
• The MONO indicator lights up while
monaural mode is activated.
• To deactivate, touch [MONO] again.
[PTY]* (For FM Radio Data System features)
Enters PTY search mode.
1 Touch a PTY code.
2 Touch [Search] to search for.
If there is a station broadcasting a
program of the same PTY code as you
have selected, that station is tuned in.
• You can set language displayed for the
PTY search on the <TUNER SETUP>
screen. (Page 19)
7
[ ]
Attenuates the sound.
• To restore the sound, touch the
button again, or adjust the volume.
[
S]/[T]
Searches for a station.
• The search method differs according
to the selected seek mode.
[SSM]*
Presets stations automatically.
[
]
Displays the <TUNER SETUP> screen.
* Appears only when FM is selected as the source.
Storing preset stations in the memory
You can preset 18 stations for FM and 6 stations for
AM.
Automatic presetting — SSM (Strong-
station Sequential Memory) (for FM only)
On the source control screen, touch as follows:
A confirmation message appears. Touch [Yes].
The local stations with the strongest signals are found
and stored automatically.
17
ENGLISH
ENKW-V2018TCM.indb17ENKW-V2018TCM.indb17 2018/01/1615:052018/01/1615:05