JVC KW-V640BT - Tuner

TunerTuner
Switching to the App screen while listening
to the another source
You can display the App screen while listening to the
other source.
• Set <DISP Key> to [App] on the <User Interface>
screen beforehand. (Page 37)
1 Display the pop-up short-cut menu.
2 Switch to the App screen.
On the pop-up short-cut menu, touch as follows:
• Each time you touch the key, the screen switches
between the current source and App screen.
Apps—WebLink™/WazeApps—WebLink™/Waze
Listening to the radio
Playback information on the source control
screen
1
99.1MHz
2
PS Name
3
PS Name
4
80.0MHz
5
90.0MHz
6
99.1MHz
TUNER
E.g. Tuner source control screen for KW-V640BT
Region 3
1 Selects the band (AM/FM1/FM2/FM3)
2 Current band/preset no.
3 Changes the seek mode for [S]/[T]
• AUTO1 (Initial): Auto search
• AUTO2: Tunes in preset stations one after
another
• MANUAL: Manual search
4 Frequency/PS name
5 Tuner reception operation keys (TI/MONO/PTY)*
6 Preset list
7 Operation keys*
Start playback
1 Select “WebLink”/“Waze” as the source.
• To use WebLink™: Select “WebLink”.
• To use Waze: Select “Waze”.
2 Operate on the unit to select App.
• On the “WebLink” source screen, you can also
operate on the touch panel as follows:
[ ]
• Displays the main menu of the
“WebLink” source screen.
• Exits the current App.
[
]
• Returns to the previous screen.
• Exits the current App.
3 Operate on your smartphone.
• When you are asked to communicate between
your smartphone and the unit, touch [Allow] to
proceed.
• If App does not start while using “WebLink”, start
the App on your smartphone.
16
ENGLISH
ENKW-V2018TCM.indb16ENKW-V2018TCM.indb16 2018/01/1615:052018/01/1615:05