JVC KW-V640BT - Settings; Audio Settings

30 ENGLISH
<Bluetooth HF/Audio>
Select the speakers used for Bluetooth mobile
phones.
• Front: Front speakers only.
• All (Initial): All speakers.
<Auto Response>
• 1 – 30 (in 5 second steps): The unit answers the
incoming calls automatically. Set the calling ring
time (seconds).
• OFF (Initial): The unit does not answer the calls
automatically. Answer the calls manually.
<Auto Pairing>
• ON (Initial): Establishes pairing automatically
with the iOS device (such as iPhone) connected
via USB. (Auto pairing may not work for some
devices depending on the iOS version.)
• OFF: Cancels.
<Sort Order>
Select a first name or last name to use when sorting
the list in alphabetical order.
• First: Sorts the list in the order of first name.
• Last (Initial): Sorts the list in the order of last
name.
SettingsSettings
Audio settings
1 Display the <Audio> screen.
On the Home screen, touch as follows:
2 Select a setting to change.
E.g. Audio settings screen for KW-V640BT Region 3
You cannot change the <Audio> screen in the
following situations:
• When the AV source is turned off.
• When the Bluetooth phone is used (making or
receiving a call, during a call, or while voice dialing).
• During navigation guidance*
* Only for KW-V640BT Region 3 except for Indonesian models/
KW-V640BTM Region 2/KW-M540BT Southeast Asian models/
KW-M540BTM.
Bluetooth®Bluetooth®
<Speaker/X’over>
Preparation:
Before making the adjustment for <Speaker/X’over>,
select the appropriate crossover network mode
according to the speaker system (2-way speaker
system or 3-way speaker system).
1 Turn off the AV source.
On the Home screen, touch as follows:
Then, on the source/option selection screen, touch
[AV Off].
2 Display the <X’over Network> screen.
On the monitor panel, press the following buttons
at the same time:
3 Select the crossover network mode.
[2way] Select this when 2-way system
speakers are used (front/rear).
[3way] Select this when 3-way system
speakers are used (tweeter/mid
range/woofer).
A confirmation message appears. Touch [Yes].
ENKW-V2018TCM.indb30ENKW-V2018TCM.indb30 2018/01/1615:062018/01/1615:06